Cameron & Sons Aircraft  NACA Inlets

NACA Inlets are the most efficient method of drawing air into and aircraft, boat or automobile.

At Cameron & Sons Aircraft, we have the largest selection of NACA ducts in the industry.  Made of poly-carbonite, they are superior in strength and temperature resistant to that of fiberglass manufactured inlets.  They also provide better airflow due to the smoothness of the surface.  They will not break down or delaminate.

We offer 11 different sized with three different types of outlets (photo 2).  With two of our scoops, the builder must add his own outlet, or leave it open to the adjacent area (009 MU-A  &  009 MU-B).  Nine of our scoops come in two parts, an inlet body  and an outlet body , exhausting the air at 0° to inlet, or where space and or adjacent equipment is a consideration at 90° outlets are available.

    Prices   

    Prices   

NACA Scoops         For aircraft,  boats  and  race-cars

Photo Gallery 3...

Cameron & Sons has eleven sizes and shape available from 3x3 in. to 12x8 in. (inlet) with exits from 1 1/2 in.  to 3 in.  All scoops are made on machined toolings, vacuum bagged and cured at 350 degree F.  Scoops are also available in epoxy- fiberglass or epoxy-graphite;  also available in polycarbonate (Lexan)

	All Parts are vacuum bagged and cured at 350 degrees F.
	<==  Machined hard tooling.
	"...good parts come from good toolings"

      Prices